Ariens

The Ariens looks the same as the Field Edge/ Earth Quake if you put them side by side and  open them up to compare the inside parts & components as below.

  • Looks the same just different color
  • Body frame has the same shape
  • outside parts such as the bar handle, clutch cable, manual coil start, spindle speed and engine setting.
  • Inside components such as:
    Engine pulley, engine v-belt guards, clutch cable, clutch springs, clutch pulleys, clutch finger guard
    Spin shaft pulley, spin shaft v-belt guards.

The only difference is the Field Edge plastic protector guard has 2  extra screws to hold the plastic protector guard to the bottom frame compare to the Ariens.
We happens to know this because we have our hands on most of the brands/models of these type of machines.
we open them up apart, outside & inside to learn to repairs defect parts.
Usually consumer do not know much details about these machines, beside the salesman trying to sell what they have on display at their store.

People who bought these machines did not realize it is difficult to manage the machine, until they actually using the machine, they will find out.

It is hard and consume a lot of energy to handle and control the machine while trimming, as you have to constantly pushing down the handle bar and balance the machine on the back two wheels.

Believe it or not - That is the only way you can be able to trim.

Awesome Wheel Attachment Plate is an Attachment mount under-neath the machine frame. Equip with a 5" caster swivel wheel.

Thanks to Awesome Wheel Attachment Plate solved all the issues describe above.



remove these 2  screws

Remove these 4 screws
Replace them with 1/4" longer screws
Come with Awesome Wheel Attachment Plate order

remove these 4 screws

Remove spin cup from spin shaft

remove spin cup from spin shaft

Remove these 2 spacer tubes from spin shaft

Remove these 2 spacer tubes from spin shaft

Remove these 2 spacer tubes from spin shaft

Remove these 2 spacer tubes from spin shaft

Plastic protector guard and V-belt finger guard bracket removed

Plastic protector guard and V-belt finger guard bracket removed

Spindle component

Spindle component

Remove top 4 bolts
to remove spindle component from spin shaft

Remember to use 1/4" longer bolts
Come with Awesome Wheel Attachment Plate order

Remove top 4 bolts to remove spindle component from spin shaft

Showing replacement bolts which 1/4" longer (right image)

than the original bolts (left image)

Replacement Bolts

Showing the spindle component removed from spin shaft
V-belt --- Finger guard bracket for v-belt

Showing the spindle component removed from spin shaft

finger guard bracket removed

finger guard bracket removed

Showing spindle & V-belt removed from spin shaft

Showing spindle & V-belt removed from spin shaft

Showing individual parts of spindle component

Showing individual parts of spindle component

Here you may want to inspect & replace parts such as
Clutch cable, springs, engine pulley, V-belt, finger guards

inspect & replace parts

showing how V-belt lay on engine pulley groove
Make sure V-belt is inside finger guards as show in photo

showing how V-belt lay on engine pulley groove

install spindle component back to spin shaft
1. lay v-belt on spin shaft pulley groove
2. place v-belt finger guard bracket as picture showed

install spindle component back to spin shaft

install top 4 bolts
Use replacement bolts 1/4" longer
come with Awesome Wheel Attachment Plate order

Insert a bolt in the top left hole from the bottom
 this will keep the spindle to the spacer-tube to the top frame together

1. install the top back 2 bolts - not to forget spacer tubes
Not to tighten the back 2 bolts

2. remove the bolt at the bottom of the spindle
As you do not need it any more

3. Install the remaining top 2 bolts - not to forget spacer tubes

install top 4 bolts

Showing the top back 2 bolts installed
Not yet tighten them
Just enough so nothing falling apart but stay together

top back 2 bolts installed

Showing top back left bolt installed not tighten but hang loose

Showing top back left bolt installed

Secure the top 4 bolts to the frame
Don't forget to use washers and lock nuts

Secure the top 4 bolts to the frame

Install Awesome Wheel Attachment Plate to the frame
Make sure they are secured

Install Awesome Wheel Attachment Plate to the frame

Awesome Wheel Attachment Plate secured to frame

Awesome Wheel Attachment Plate secured to frame

install 2 spacer tubes back to spin shaft

install 2 spacer tubes back to spin shaft

Install spin Plate back to spin shaft
make sure spin plate sleeve pointing up as picture showed

Install spin Plate back to spin shaft

install 2 spacer tubes back to spin shaft

install 2 spacer tubes back to spin shaft

Install spin cup back to spin shaft

Install spin cup back to spin shaft


The Ariens with Awesome Wheel Attachment Plate installed

                                                                                                                                                                



Your shopping cart is empty!